Zero 88 ZeroWire CRMX Wireless DMX RDM & Ethernet Transmitter
-66870-p.jpg?v=eac2215d-4cda-4d9c-b025-36d952ceaa5a)
-66870-p.jpg?v=eac2215d-4cda-4d9c-b025-36d952ceaa5a)
Price
£1,114.35
Loyalty Points
1114 points
Product Code
ZeroWire CRMX Wireless DMX RDM & Ethernet Transmitter
Brand
Zero 88
MPN
ZeroWire CRMX
MPN: ZeroWire CRMX
Description
Zero 88 ZeroWire CRMX Wireless DMX RDM & Ethernet Transmitter
Based on the first automated and adaptive wireless technology developed specifically for the lighting industry - the ZeroWire CRMX brings a new level of assurance to wireless DMX systems.
CRMX is the first system to continuously scan the radio spectrum and adapt to the best frequency without interruption. This avoids both interference in the increasingly crowded license free radio sphere, as well as helps to maximize the performance of all the other radio systems sharing those frequencies. In short, it’s a smart radio that adapts. Add RDM and a rugged enclosure suitable to the demands of the entertainment and architainment industry and the package is complete.
Product Features
Automated Cognitive Coexistence CRMX wireless transmissions never disturb, or are disturbed by, other wireless equipment. This fully automated feature offers unrivaled convenience and peace of mind during operation
Fidelity - The DMX frame output is identical to the frame input
Error correction - Advanced algorithms recreate corrupt or lost radio packets
Compliance - Non-compliant DMX is corrected to meet the DMX512-A standard
Synchronization - Precision timing mechanism guarantees synchronized frame delivery
Latency - Industry best; 5ms even in multi- universe systems
Ethernet support - Art-Net I & II and Streaming ACN (draft & final) protocols
RDM Enabled
Ease of use - One button simplifies all setup
Ease of mounting - Multiple mounting options facilitate easy rigging or rack mounting
Security - 128 bit encryption ensures no hacker interference
Legacy support - ZeroWire CRMX receivers are compatible with all CRMX systems and legacy W-DMX™ systems [1]
Upgradeable - Software and firmware readily available from our website
Physical
Enclosure: Anodized extruded aluminiumn
Dimensions (W x H x D) excluding antenna: 110 x 44 x 160 mm /4,3” x 1,7” x 6,3”
Weight: 0,8kg, 1,76lb
Connectors
Antenna connector: RP-TNC male
DMX connectors: 1 XLR 5-pin male (TX)/ 1 XLR 5-pin female (RX)
Ethernet connectors: 1 Neutrik®Ethercon™ RJ45
DC input: Pluggable terminal strip,Phoenix® MSTB 2,5
AC input: IEC 320-C14 Male
DMX Interface
Number of universes supported: 1
Full DMX fidelity and frame integrity: Yes
W-DMX™ Compatibility: Yes, receive only[2]
Error correction and packet recovery: Yes
Frame synchronization: Less than 0,01 ms
End-to-end DMX latency: Less than 5 ms
Auto sensing of DMX frame rate and size: Yes
Supported DMX frame rates: 0,8 – 7352 Hz
Number of DMX channels supported: 0 – 512
Loss of DMX input behaviour: Timeout after 1,25s
ESD protected interfaces: Yes
High voltage input: 85-264VAC / 47-70Hz / 5W
Low voltage input: 12VDC ±20% / 11W
Power over Ethernet: Yes (on transmitter)
Transient protected power inputs: Yes
RF Characteristics
Automated Cognitive Coexistence: Yes
Dynamic adaptive frequency hopping: Yes
Recoverable Radio Packet Error Rate: 30%
Operational frequency range: 2402-2480MHz
RF output in high power mode: 300mW (25dBm)[3]
RF output in normal power mode: 100mW (20dBm)
RF output in low power mode: 50mW (17dBm) or 10mW (10dBm)
RF modulation: GFSK
Sensitivity at 0.1%: Packet Error Rate -96dBm
Tested link range (Normal power mode using standard antennasin urban area): 500m
Recovery time upon loss of signal: Less than 1s
Based on the first automated and adaptive wireless technology developed specifically for the lighting industry - the ZeroWire CRMX brings a new level of assurance to wireless DMX systems.
CRMX is the first system to continuously scan the radio spectrum and adapt to the best frequency without interruption. This avoids both interference in the increasingly crowded license free radio sphere, as well as helps to maximize the performance of all the other radio systems sharing those frequencies. In short, it’s a smart radio that adapts. Add RDM and a rugged enclosure suitable to the demands of the entertainment and architainment industry and the package is complete.
Product Features
Automated Cognitive Coexistence CRMX wireless transmissions never disturb, or are disturbed by, other wireless equipment. This fully automated feature offers unrivaled convenience and peace of mind during operation
Fidelity - The DMX frame output is identical to the frame input
Error correction - Advanced algorithms recreate corrupt or lost radio packets
Compliance - Non-compliant DMX is corrected to meet the DMX512-A standard
Synchronization - Precision timing mechanism guarantees synchronized frame delivery
Latency - Industry best; 5ms even in multi- universe systems
Ethernet support - Art-Net I & II and Streaming ACN (draft & final) protocols
RDM Enabled
Ease of use - One button simplifies all setup
Ease of mounting - Multiple mounting options facilitate easy rigging or rack mounting
Security - 128 bit encryption ensures no hacker interference
Legacy support - ZeroWire CRMX receivers are compatible with all CRMX systems and legacy W-DMX™ systems [1]
Upgradeable - Software and firmware readily available from our website
Physical
Enclosure: Anodized extruded aluminiumn
Dimensions (W x H x D) excluding antenna: 110 x 44 x 160 mm /4,3” x 1,7” x 6,3”
Weight: 0,8kg, 1,76lb
Connectors
Antenna connector: RP-TNC male
DMX connectors: 1 XLR 5-pin male (TX)/ 1 XLR 5-pin female (RX)
Ethernet connectors: 1 Neutrik®Ethercon™ RJ45
DC input: Pluggable terminal strip,Phoenix® MSTB 2,5
AC input: IEC 320-C14 Male
DMX Interface
Number of universes supported: 1
Full DMX fidelity and frame integrity: Yes
W-DMX™ Compatibility: Yes, receive only[2]
Error correction and packet recovery: Yes
Frame synchronization: Less than 0,01 ms
End-to-end DMX latency: Less than 5 ms
Auto sensing of DMX frame rate and size: Yes
Supported DMX frame rates: 0,8 – 7352 Hz
Number of DMX channels supported: 0 – 512
Loss of DMX input behaviour: Timeout after 1,25s
ESD protected interfaces: Yes
High voltage input: 85-264VAC / 47-70Hz / 5W
Low voltage input: 12VDC ±20% / 11W
Power over Ethernet: Yes (on transmitter)
Transient protected power inputs: Yes
RF Characteristics
Automated Cognitive Coexistence: Yes
Dynamic adaptive frequency hopping: Yes
Recoverable Radio Packet Error Rate: 30%
Operational frequency range: 2402-2480MHz
RF output in high power mode: 300mW (25dBm)[3]
RF output in normal power mode: 100mW (20dBm)
RF output in low power mode: 50mW (17dBm) or 10mW (10dBm)
RF modulation: GFSK
Sensitivity at 0.1%: Packet Error Rate -96dBm
Tested link range (Normal power mode using standard antennasin urban area): 500m
Recovery time upon loss of signal: Less than 1s
Customer Reviews
Write an online review and share your thoughts with other shoppers!